Thank you very much for reply, Below my log.
I am doing the following step
./run
start DMA 1
Loop 8
My Problem I don't get read passed /write passed 1 , with very low throughput less 0.1G
[ 1316.143821] Altera DMA: altera_dma_remove(), __DATE__ __TIME__
[ 1316.161570] Altera DMA: altera_dma_init(), __DATE__ __TIME__
[ 1316.161596] Altera DMA 0000:02:00.0: pci_enable_device() successful
[ 1316.161643] Altera DMA 0000:02:00.0: pci_enable_msi() successful
[ 1316.161650] Altera DMA 0000:02:00.0: using a 64-bit irq mask
[ 1316.161651] Altera DMA 0000:02:00.0: irq pin: 1
[ 1316.161652] Altera DMA 0000:02:00.0: irq line: 10
[ 1316.161653] Altera DMA 0000:02:00.0: irq: 43
[ 1316.161654] Altera DMA 0000:02:00.0: request irq: 10
[ 1316.161655] Altera DMA 0000:02:00.0: BAR[0] 0xd2208000-0xd22081ff flags 0x0014220c, length 512
[ 1316.161657] Altera DMA 0000:02:00.0: BAR[1] 0x00000000-0x00000000 flags 0x00000000, length 0
[ 1316.161658] Altera DMA 0000:02:00.0: BAR[2] 0x00000000-0x00000000 flags 0x00000000, length 0
[ 1316.161659] Altera DMA 0000:02:00.0: BAR[3] 0x00000000-0x00000000 flags 0x00000000, length 0
[ 1316.161660] Altera DMA 0000:02:00.0: BAR[4] 0xd2200000-0xd2207fff flags 0x0014220c, length 32768
[ 1316.161661] Altera DMA 0000:02:00.0: BAR[5] 0x00000000-0x00000000 flags 0x00000000, length 0
[ 1316.161672] Altera DMA 0000:02:00.0: BAR[0] mapped to 0xffffc90000fe2000, length 512
[ 1316.161677] Altera DMA 0000:02:00.0: BAR[4] mapped to 0xffffc90001540000, length 32768
[ 1318.795184] Read DMA times out
[ 1318.795186] DWORD = 00000200
[ 1318.795187] Desc = 00000080
[ 1318.992722] Write DMA times out
[ 1318.992722] DWORD = 00000200
[ 1318.992723] Desc = 00000080
[ 1319.211383] Simultaneous DMA times out
[ 1319.211383] DWORD = 00000200
[ 1319.211384] Desc = 00000080
[ 1323.836579] Read DMA times out
[ 1323.836581] DWORD = 00000200
[ 1323.836581] Desc = 00000080
[ 1324.033586] Write DMA times out
[ 1324.033586] DWORD = 00000200
[ 1324.033587] Desc = 00000080
[ 1324.251871] Simultaneous DMA times out
[ 1324.251871] DWORD = 00000200
[ 1324.251872] Desc = 00000080
[ 1332.790695] Read DMA times out
[ 1332.790697] DWORD = 00000200
[ 1332.790698] Desc = 00000080
[ 1332.988569] Write DMA times out
[ 1332.988570] DWORD = 00000200
[ 1332.988571] Desc = 00000080
[ 1333.207756] Simultaneous DMA times out
[ 1333.207757] DWORD = 00000200