Forum Discussion

New Contributor

1 year ago

Agilex 5 E-series 065A GTS PMA/FEC Direct PHY

We want to use an Agilex 5E device Group A to make a 4x25Gbps transceivers integrating RS-FEC. When I use Quartus Pro 24.3, the only transceiver PHY is the GTS PMA/FEC Direct PHY Intel FPGA IP, and ...

Ethernet

paveetirrasrie_Altera

Frequent Contributor

1 year ago

Hi,

FEC in Agilex 5 doesn't support bonding and that is the reason we have limited to single lane for the FEC Direct.

You may instantiate Multiple Single lane FEC designs and handle the Parallel Data handling for more than single channels.

Regards,

Pavee

Manuel4

New Contributor

1 year ago

Thanks

Do you have any example project file that instantiate multiple single lane FEC ?

Forum Discussion

Agilex 5 E-series 065A GTS PMA/FEC Direct PHY

Recent Discussions

Cyclone® 10 GX Avalon®-ST Interface for PCI Express example Simulation

Agilex-7 AXI MCDMA for PCIe hang

Can't generate F-Tile Ethernet Hard IP Design Example

Avalon-MM Cyclone V Hard IP for PCI Express Intel FPGA IP Soft Reset and Hard Reset

Agilex 7 slew rate reconfiguration