Forum Discussion

Manuel4's avatar
Manuel4
Icon for New Contributor rankNew Contributor
1 year ago

Agilex 5 E-series 065A GTS PMA/FEC Direct PHY

We want to use an Agilex 5E device Group A to make a 4x25Gbps transceivers integrating RS-FEC. When I use Quartus Pro 24.3, the only transceiver PHY is the GTS PMA/FEC Direct PHY Intel FPGA IP, and ...
Ethernet
paveetirrasrie_Altera's avatar
paveetirrasrie_Altera
Icon for Frequent Contributor rankFrequent Contributor
1 year ago

Hi,


FEC in Agilex 5 doesn't support bonding and that is the reason we have limited to single lane for the FEC Direct.

You may instantiate Multiple Single lane FEC designs and handle the Parallel Data handling for more than single channels.


Regards,

Pavee


  • Manuel4's avatar
    Manuel4
    Icon for New Contributor rankNew Contributor
    1 year ago

    Thanks

    Do you have any example project file that instantiate multiple single lane FEC ?