Agilex 100G E-Tile MAC interface tx_ready is continuously flipping after linkup.

Hi,

You may use i_tx_error for testing, to generate errored packets. To invalidate an errored frame, end it with i_tx_endofpacket and assert i_tx_error. If the frame is good, deassert i_tx_error. For further information, you may refer to link below, Figure 40, pg 128, https://www.intel.com/content/www/us/en/docs/programmable/683468/23-2/tx-mac-interface-to-user-logic.html

Best regards,

zying