Forum Discussion

M_Goto's avatar
M_Goto
Icon for New Contributor rankNew Contributor
4 years ago

About the power supply of cyclone10LP

hello, I am using 10CL016 F484. The power supply is used as follows. VCCIO monotonically reaches 3.3V as shown in the attached figure (ch2). VCCINT, VCCD_PLL, and VCCA also monotonically reach ...
AminT_Intel's avatar
AminT_Intel
Icon for Regular Contributor rankRegular Contributor
4 years ago

Hello Goto,

I understand you are concerned about the drop voltage value. May I know what IO standard are you using in your design?

Thank you.

  • M_Goto's avatar
    M_Goto
    Icon for New Contributor rankNew Contributor
    4 years ago

    Thank you for answering me.

    IO standard is a Single-Ended I / O Standard Specifications.
    My design uses 3.3-V LVTTL and 3.3-V LVCMOS.

    best reguards

    Goto

      • AminT_Intel's avatar
        AminT_Intel
        Icon for Regular Contributor rankRegular Contributor
        4 years ago

        We do not receive any response from you to the previous question/reply/answer that I have provided. This thread will be transitioned to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you.