Forum Discussion

ZWang142's avatar
ZWang142
Icon for New Contributor rankNew Contributor
5 years ago

1/2.5/5/10G Multi-rate Ethernet PHY simulation cannot reach rx_block_lock

The simulation of the example design, provided by the "Low Latency Ethernet 10G MAC" IP, is running fine. However, when simulating my design, the PHY can not acheive rx_block_lock. The waveform sho...
Deshi_Intel's avatar
Deshi_Intel
Icon for Regular Contributor rankRegular Contributor
5 years ago

HI,

Thanks. This is great info.

let me try to duplicate this issue on the example design from my side.

Regards,

dlim