Forum Discussion

Occasional Contributor

3 years ago

100G E-Tile transceiver adaptation

I am having trouble getting the RX side of the link working with the E-Tile in 100G mode on an Agilex F 014 part (DE10-Agilex board). I previously had a similar issue with the E-Tile in 10G and 25G ...

Kshitij_Intel

Frequent Contributor

3 years ago

Hi Alex,

It seems you are loading the configuration but PMA Adaption needs to be enabled manually which not happening in your case.

Please follow one of flow for PMA Bring up to start with follow the STF Link bring up flow(LHS)

https://www.intel.com/content/www/us/en/docs/programmable/683723/current/pma-bring-up-flow.html

Thank you

Kshitij Goel

Forum Discussion

100G E-Tile transceiver adaptation

Recent Discussions

F-Tile Ethernet Hard IP (100G)

Cyclone® 10 GX Avalon®-ST Interface for PCI Express example Simulation

Agilex-7 AXI MCDMA for PCIe hang

Can't generate F-Tile Ethernet Hard IP Design Example

Avalon-MM Cyclone V Hard IP for PCI Express Intel FPGA IP Soft Reset and Hard Reset