Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

wire the 16207 lcd to nios2 module

I have a EP3SL150 board and want to use the 16207 lcd on it with my nios2 processor! I already included the corresponding module in my sopc design and generated my processor. Now i have to wire...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
15 years ago

It looks ok... check that you assigned the correct pins to those signals (prefferably using the board schematics rather than the documentation).

You can also put some SignalTap probes to see if you are driving the LCD correctly.