Forum Discussion
SGeor22
New Contributor
New ContributorWhy my Intel Cyclone10 GX can't connect to 10Gbps network adapter on PC ?
Configuration:
1) A board Intel Cyclone10 GX FPGA Development Kit 2) a network adapter on PC: 10Gbps Intel(R) Ethernet Server Adapter X520-1
3) I connect using fibre cable.
I see no LED...
SGeor22New Contributor
New Contributor1) Does the network adapter support 10GE protocol which is implemented in FPGA Cyclone10GX ?
2) In my post I attached a piece of documentation which describes interaction on PHY-level FPGA Cyclone 10GX and MAC level of code which is written for FPGA Cyclone 10GX project, in case of handling Local / Remote Fault.
3) So my question is: should I implement a procedure to handle messages Local / Remote Fault to establish a point-to-point connection between PC and FPGA Cyclone 10GX?
