Forum Discussion

KeeganJ's avatar
KeeganJ
Icon for New Contributor rankNew Contributor
5 years ago

Use cyclone 10 GX transceiver as 1-bit ADC

I have a signal consisting of very fast sub-nanosecond pulses from the output of a comparator, and I am wondering if it's possible to use the multi-gigabit transceivers to sample and acquire the sign...
CheepinC_altera's avatar
CheepinC_altera
Icon for Regular Contributor rankRegular Contributor
5 years ago

Hi,


Thanks for your update. I could understand your target usage. Since this is something not an intended usage of the receiver, I could not comment if the RX will be able to provide your expected data to the fabric in lock-to-ref mode. It is recommended for you to perform thorough validation using hardware to ensure it is behaving per your target application. Sorry for the inconvenience.


Please let me know if there is any concern. Thank you.



Best regards,

Chee Pin