Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Use a FPGA to flash the Nios II program in another FPGA

Hallo colleagues, I have the following problem: I have to work with a system in which I have a first FPGA which controls the JTAG port of a second FPGA. In this second FPGA I have a Nios II so...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
14 years ago

Thank you very much for your information.

I do not know very well what do you mean by knowing the protocols required to perform the flash programming. I know general JTAG protocol to perform boundary scan, but I do not know if I can access to any specific documentation for the Altera flash programming.

If you can refer some documentation it would be really helpful.