Forum Discussion

EKPRE's avatar
EKPRE
Icon for New Contributor rankNew Contributor
7 years ago

USB Blaster not recognized in Quartus II 10.0 Web Edition Programmer

High, i want to start programming FPGA, i use the Terasic DE2-115 eval Board. I installed the USB-Blaster driver which is recognized in the Windows10 Device manager but i can't see it in the progra...
EKPRE's avatar
EKPRE
Icon for New Contributor rankNew Contributor
7 years ago

Hi finally,

i solved the issue following theses steps :

1- Install the latest version of quartus Lite 18.1.

2- Download the latest version of DE2-115 CD from terasic website.

3- Change the environment variables to path the quartus installation folder.

4- When running the Control panel, be sure to have the swith on the RUN mode otherwise it doesn't work.

You can find more details on the link bellows :

https://www.coursehero.com/file/27366819/Run-control-panel-under-Quartus-II-150-or-late-versionpdf/

Hope it can help!!!

Best regards.