Forum Discussion

New Contributor

7 years ago

USB Blaster not recognized in Quartus II 10.0 Web Edition Programmer

High, i want to start programming FPGA, i use the Terasic DE2-115 eval Board. I installed the USB-Blaster driver which is recognized in the Windows10 Device manager but i can't see it in the progra...

Vicky1

Regular Contributor

7 years ago

Hi,

Update drivers, check the USB blaster cable connection wit the board, check the visual inspection the board especially FPGA pins & refer the link below,

https://www.intel.com/content/www/us/en/programmable/documentation/nfa1418282998564.html

Try to check with Stand alone programmer,

https://www.intel.com/content/www/us/en/programmable/downloads/software/prog-software/100.html

Why don`t you use latest Quartus lite version?

Regards,

Vicky

EKPRE
New Contributor
7 years ago
Hi Vicky,
thanks for you answer, i'm downloading the latest version of the quartus lite (18.1) hope it will work.
Best rgards !
Ettien

Forum Discussion

USB Blaster not recognized in Quartus II 10.0 Web Edition Programmer

Recent Discussions

FA request A1822 5840 PCIE INC0039191

FPGA issue on electronic board

Cyclone V HPS I2C1 issue: no activity on bus

Clarification on Arria 10 Design Security Features

Agilex 5 A5ED043AB23AI2V with pcie and usb 3.1 design issue