Forum Discussion

Firaseng's avatar
Firaseng
Icon for New Contributor rankNew Contributor
2 years ago

Upgrade FPGA family

Hi Community,

I would like to know what steps do I need to take in order to easily migrate my design from EP1K30TI144-2 FPGA to something currently in production such as the Cyclone II or Max10

FPGA .

Regards

Configuration

2 Replies

  • Farabi_Altera's avatar
    Farabi_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hello,


    1. Download Quartus standard(no need license)
    2. port your original design into MAX10
    3. re-assigned all the IO pins
    4. re-compile design
    5. make sure all timing are closed
    6. design migration process complete


    Notes: You may need to have new board layout as the pin locations not same.

    MAX10 is guaranteed to be available for the next 10years until 2035.


    regards,

    Farabi


  • Farabi_Altera's avatar
    Farabi_Altera
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    I am transferring this case to community for the community to share their experience and knowledge. If you have another question, please raise another forum case, we will be happy to help you.


    best regards,

    Farabi