Forum Discussion

SHA_KHALEED's avatar
SHA_KHALEED
Icon for New Contributor rankNew Contributor
3 years ago

Unable to detect FPGA on iMX8 Processor using lspci command

Hi,

I am using a host PC running on Windows to connect to iMX8 by NXP running on Linux to detect the FPGA Cyclone 10 device using PCIe.

I have configured the Tera Term serial port and I am able to see the iMX8 booting. I want to now detect the FPGA(Intel cyclone 10) vendor id using the command "lspci" but when I do that I am not getting any output for this command.

Please suggest what can be done to FPGA vendor id on iMX8 using the "lspci" command on iMX8

Thanks.

1 Reply

  • skbeh's avatar
    skbeh
    Icon for Contributor rankContributor
    3 years ago

    lspci is a Linux command to see actual hardware configuration space in the PCIe devices.

    Refer to the lspci Linux main page (linux.die.net/man/8/lspci) for more usage options.

    i.e.

    -d [<vendor>]:[<device>]

    Show only devices with specified vendor and device ID. Both ID's are given in hexadecimal and may be omitted or given as "*", both meaning "any value".


    Cyclone 10 default Vendor ID=0x1172 & Device ID=0x0000