Forum Discussion

hsyn's avatar
hsyn
Icon for New Contributor rankNew Contributor
2 years ago

troubleshoot for 5CSEBA4U23I7N (cyclone V fpga processor)

Hello, I am trying to troubleshoot a pcb with a 5CSEBA4U23I7N cyclone V fpga processor. The resistance value I measured between 3V3 and GND for the intact pcb is around 380ohm. One of the PC...
Board Debug
  • hsyn's avatar
    hsyn
    Icon for New Contributor rankNew Contributor
    2 years ago

    Since the FPGA is not attached to the PCB, I can not power it and test it.

    How can I check the status of I/O pins with a multimeter?

    Or with a different method.