Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

TEMPDIODE reading low

I'm reading the temp diode on a stratix IV fpga, and it reading about 50C below what it should be. It is changing in regards to thermal heat and cooling, but it always seems about 50C too low....
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Truly I don't know how to use the ADC on an Actel Fusion AFS600 to monitor the temperature on a Stratix IV. You really shouldn't be looking at Altera's megafunction user's guide to solve this because you are not using the megafunction. I think you need to be talking to the Actel FAE to solve your problem.

Jake