Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorTEMPDIODE reading low
I'm reading the temp diode on a stratix IV fpga, and it reading about 50C below what it should be. It is changing in regards to thermal heat and cooling, but it always seems about 50C too low....
Altera_ForumHonored Contributor
Honored ContributorCan you confirm that you are connected as shown in figure 2-77 on page 2-96 of the AFS600 datasheet?
http://www.actel.com/documents/fusion_ds.pdf Jake
