Forum Discussion

Ajay_Khedekar's avatar
Ajay_Khedekar
Icon for New Contributor rankNew Contributor
2 years ago
Solved

Sub -LVDS IO standard

Hello , I have one image sensor with 20 lane Sub-LVDS output (16 lane data and 4 lane clock) with following dc characteristics Symbol Description Min. Typical Max Condition ...
Configuration
  • Ajay_Khedekar's avatar
    Ajay_Khedekar
    2 years ago

    Hello guys,

    I really appreciate the your efforts.
    From your suggestions, i could make the conclusion that to interface the sub LVDS i need to check the IO receiver standard specifically i need check the VICM range along with receiver swing range. Also we need to careful about choosing the DDR LVDS receiver speed as well.


Ajay_Khedekar's avatar
Ajay_Khedekar
Icon for New Contributor rankNew Contributor
2 years ago

Hello guys,

I really appreciate the your efforts.
From your suggestions, i could make the conclusion that to interface the sub LVDS i need to check the IO receiver standard specifically i need check the VICM range along with receiver swing range. Also we need to careful about choosing the DDR LVDS receiver speed as well.