Forum Discussion
Ajay_Khedekar
New Contributor
New ContributorSub -LVDS IO standard
Hello , I have one image sensor with 20 lane Sub-LVDS output (16 lane data and 4 lane clock) with following dc characteristics Symbol Description Min. Typical Max Condition ...
Hello guys,
I really appreciate the your efforts.
From your suggestions, i could make the conclusion that to interface the sub LVDS i need to check the IO receiver standard specifically i need check the VICM range along with receiver swing range. Also we need to careful about choosing the DDR LVDS receiver speed as well.
AqidAyman_Altera
Regular Contributor
Regular ContributorFrom what I understand, LVDS receiver are capable of being driven by sub-LVDS driver although the Vcm and Vid levels are reduced from typical LVDS.
However, if you refer to Intel Max 10 datasheet, there are supported sub-LVDS I/O standard listed in the table for your reference. You can refer below link:
However
