Forum Discussion
allen18
Occasional Contributor
Occasional Contributorstratix10 configuration
hello, I am using quartus Pro 22.3 , device ( stratix10 1SX110HN2F43I2VG ) , flash( MT25QU512). When I load the flash using JTAG with a JIC file, and then power cycle the board, FPGA can ...
I used the RPD file generated simultaneously with the JIC file generation, and also enabled bit swap. This configuration was successful.
allen18Occasional Contributor
Occasional ContributorI used the RPD file generated simultaneously with the JIC file generation, and also enabled bit swap. This configuration was successful.
