Forum Discussion

shad3's avatar
shad3
Icon for New Contributor rankNew Contributor
2 years ago

Stratix V FPGA Ordering Part Number and Release status

I'm interested in the usage of the Stratix V FPGA mentioned on this page: FPGA for Military Applications - Intel® FPGA And while the section for the Stratix V FPGA says it should be available in 20...
Board Debug
NazrulNaim_Intel's avatar
NazrulNaim_Intel
Icon for Regular Contributor rankRegular Contributor
2 years ago

Hello,


For your information Cyclone device only have the minimum of junction temperature of -40°. For more information regarding Cyclone device, it can be accessed through the link below.


Cyclone IV : https://cdrdv2.intel.com/v1/dl/getContent/653974?explicitVersion=true&fileName=cyclone4-handbook.pdf

Cyclone V : https://cdrdv2.intel.com/v1/dl/getContent/666729?fileName=cv_51001-683694-666729.pdf

Cyclone 10 : https://cdrdv2.intel.com/v1/dl/getContent/666875?fileName=c10lp-51001-683879-666875.pdf


Hope that answers your question.


Best regards,

Nazrul Naim


  • shad3's avatar
    shad3
    Icon for New Contributor rankNew Contributor
    2 years ago

    Do you happen to have another FPGA option that fits the Cyclone Footprint, but is rated for -55°?

    I'm looking for something to use in a design that will be able to replace the Cyclone V in in footprint and functionality, but I'm needing it to be rated at -55° for the minimum junction temperature.