Forum Discussion

hzhan133's avatar
hzhan133
Icon for New Contributor rankNew Contributor
5 years ago

STRATIX 10 JTAG Configure problem

Device: Stratix 10 ​1SX280HH3F55E2VG SOFTWARE: Quartus 19.1 Encounter a configuration problem, as follows: Can identify the JTAG chain, where FPGA0 can download the sof file normally, FPGA1 fails ...
hzhan133's avatar
hzhan133
Icon for New Contributor rankNew Contributor
5 years ago

USB Blaster I.

It is difficult to determine the specific error from the error message. Please try these two methods first:

1. Quartus project do not bring GXB, DDR, or EMIF, only do the simplest lighting project

A: The error has changed. The prompt may be a PMBUS configuration problem, but this SOF configuration file is OK on other boards or different FPGAs of the same board. For details, please refer to the attachment