Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Strange max 10 startup & non-volatile operation

I have a PCB I made using the Max 10 10M16DAF256C8G dual supply series FPGA. I've observed some unexpected behaviors in terms of startup and non-volatile operation. When programming the board ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
9 years ago

Yes, you did. One more thing, those eval boards have a CPLD feeding the JTAG lines. On our board, it goes directly from the FPGA pins to a connector for the USB blaster. Again, not sure if that is an issue.