Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

SRAM controller in SOPC buil

Hi, Actually my project contains ISSI SRAM 512x16 bit. On my board there are two of these cascaded. While testing, I used the memtest code given in NIOS IDE. My hardware image contained NIOS p...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

NIOS processor is set to boot from onchip memory. I wanted to confirm whether the controller of SRAM keeps on sending some set pattern on its pins, even when software code is not running?