Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

SignalTap needs only M9K memory in Quartus II 9.1

Helllo members. I got a problem while designing using Quartus II 9.1 SP2 with signalTap. SignalTap always uses M9K memory even though I set the memory type AUTO during fitting. Does an...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Then set it to use M144k

On auto, it just uses whatever is available. It should never use already assigned memory.