Forum Discussion

New Contributor

5 years ago

Solved

Setting up wireless communication on Cyclone V

Hello, I need to setup wifi communication on a Cyclone V SoCKit. I know that I need some form of wifi interface module and I've been searching for a wifi IP to work with the Cyclone but I cannot see...

SyafieqS
5 years ago
Hi Michael,

Sorry I was giving the wrong category, it is in DSP. I found the WLAN IP Core, IEEE 802.11n/ac LDPC Decoder from Creonic (Intel DSN Partner)
https://www.intel.com/content/www/us/en/programmable/solutions/partners/partner-profile/creonic/ip/ieee-802-11n-ac-ldpc-decoder.html

You can refer to that for documentation, IP metric details and can contact Creonic for additional services and features. Refer to link below for contact.

https://www.intel.com/content/www/us/en/programmable/solutions/partners/partner-profile/creonic.html

Thanks,
Regards

SyafieqS

Super Contributor

5 years ago

Hi Michael,

I suggest you to go through to link below and select Interface Protocols. From there you can sort the IPs that you require for your design. There you can get more details related to the supports and requirements.

https://www.intel.com/content/www/us/en/programmable/products/intellectual-property/ip.html

Thanks,

Regards

Matcha

New Contributor

5 years ago

Thank you SyafieqS, I'll look into and post back here when I have more questions

Forum Discussion

Setting up wireless communication on Cyclone V

Recent Discussions

MAX 10: Can an ASx1 RBF be written directly to internal CFM via on-chip flash Avalon-MM?

Cold Temperature Issue

Cyclone 10 GX AS x4 Configuration Compatibility with Infineon S25FS512S (Custom Flash Definition)

Thermal model for Max10 FPGA

Drop-in replacement for EPCS64SI16N