Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorSDRAM Controller-Problem
Hi, i build a design in SOPC Builder on Quartus 8.0 (CycloeIII) that looks like this : [CPU]<------->[Half rate bridge]<--------->[SDRAM Controller(not DDR)]. 66MHz ...
Altera_ForumHonored Contributor
Honored ContributorIt should but it didn't.
there is 2 sdram chip@32bit data width. i design my system like it has bin done here:page 11-21 http://www.altera.com/literature/ug/ug_sopc_builder.pdf does the hafl rate bridge works with SDRAM Controller or with DDR SDRAM Controller? Thanks
