Forum Discussion

Rk_Athram's avatar
Rk_Athram
Icon for Occasional Contributor rankOccasional Contributor
3 years ago

Remote system update for arria10 FPGA

Hi, we are using Arria 10 FPGA DEVICE "10AX057N2F40E2SG", we needed to use Remote system update feature for our custom board. From the intel design store, there are two reference design module...
Configuration
tehjingy_Altera's avatar
tehjingy_Altera
Icon for Regular Contributor rankRegular Contributor
3 years ago

Hi


Form the error logs, it could be a driver compatibility issue.

Is it possible to try it out on a Centos OS machine?

In the user guide it mention that a Centos OS Machine was used.


2.1. Hardware Requirements

1. Intel Arria 10 GX FPGA Development Kit.

2. Micro USB to USB Type A cable for configuring the FPGA device.

3. A computer with a PCIe Gen3 x8 or x16 slot running Linux Operating System. CentOS Linux 7.4 64bit was used for this reference design testing.

4. A Windows or Linux computer to run Quartus Prime Pro software and configure the Intel Arria 10 GX FPGA Development Kit.



In the host machine I am using is also a centos running machine:


Operating System: CentOS Linux 7 (Core)

CPE OS Name: cpe:/o:centos:centos:7

Kernel: Linux 3.10.0-1160.45.1.el7.x86_64

Architecture: x86-64



Regards

Jingyang, Teh