Forum Discussion

Occasional Contributor

3 years ago

Remote system update for arria10 FPGA

Hi, we are using Arria 10 FPGA DEVICE "10AX057N2F40E2SG", we needed to use Remote system update feature for our custom board. From the intel design store, there are two reference design module...

Configuration

Rk_Athram

Occasional Contributor

3 years ago

Hi Jingyang, Teh

Thank you for the response.

We have tried the example design at our end but we are getting error.

Please refer the thread for error details

https://community.intel.com/t5/Programmable-Devices/Facing-Issue-On-Design-Example-Intel-Arria-10-FPGA-Remote-System/m-p/1283715#M80022%3Fwapkw=RSU_over_PCIe%20driver

Please suggest how to overcome the error.

Thanks and Regards,

Rajesh

Forum Discussion

Remote system update for arria10 FPGA

Recent Discussions

MAX 10: Can an ASx1 RBF be written directly to internal CFM via on-chip flash Avalon-MM?

Cyclone V SoC 5CSXC6 Series GXB Utilization and Limitations

JESD204B RX Link Never Achieves CGS at 12.8 Gbps on S10 ES (1SG280LU3F50E3VGS1, Quartus Pro 17.1)

Unable to Generate Valid PAM4 Eye Diagram and BER Measurements on Stratix 10 SI E-Tile Native PHY

Error (209014): CONF_DONE pin failed to go high in device 1.