Forum Discussion

Occasional Contributor

3 years ago

Remote system update for arria10 FPGA

Hi, we are using Arria 10 FPGA DEVICE "10AX057N2F40E2SG", we needed to use Remote system update feature for our custom board. From the intel design store, there are two reference design module...

Configuration

Rk_Athram

Occasional Contributor

3 years ago

Hi Jingyang, Teh

From the given link below, There is an example design for RSU.

https://www.intel.com/content/www/us/en/design-example/714766/arria-10-intel-fpga-remote-system-update-via-pci-express.html

which is posted in 20-01-2021.

From your statement

"Sorry to inform you that the Remote System Update is only for Stratix 10 and Agilex 7 devices currently"

is intel not supporting now this feature for Arria10 devices???

Thanks,

Rajesh

Forum Discussion

Remote system update for arria10 FPGA

Recent Discussions

intel_onchip_Memory II RAM: r/w doesn t work from FPGA but from HPS

Power Rating Required for RZQ Resistor on Cyclone V SE

MAX 10. No 3.0 V Schmitt Trigger I/O standard

Arria 10: Remote Update may brick FPGA and Factory Fallback won't work

Unable to program EPCQ16A on custom cyclone IV board - error during jic flashing.