Forum Discussion

flbolos's avatar
flbolos
Icon for New Contributor rankNew Contributor
2 years ago

Reliability

Hi, I'm Fernando López, reliability calculation engineer at Indra Sistemas. We are using some of the components of it (

EPC16QI100N
EP2S90F1508I4
EPCS64SI16N
EPM570T100I5N
10M16DCF484I7G

) for one of our systems. Please, could you send us some reliability data (MTBF, Failure Rate, FIT, ...) or study (Htol) specifying environment and temperature?

Thank you.

Configuration

3 Replies

  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hi,

    Thank you for reaching out. Allow me some time to look into your issue. I shall come back to you with findings.

    Thank you for your patience.

    Best Regards,

    Nazrul Naim


  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hello,


    For your information regarding the request for the FIT value of EP2S90F1508I4 & 10M16DCF484I7G.Below are the details for the FIT value.


    FIT (EP2S90F1508I4) = 15.5 @ 70C junction operating temperature, 60% confidence level.

    FIT (10M16DCF484I7G) = 20.5 @ 70C junction operating temperature, 60% confidence level.


    For product EPC16QI100N & EPCS64SI16N were long obsolete. The reliability report needed NDA from customer as these are old products.


    Hope that answers your question.


    Best regards,

    Nazrul Naim



  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hi,

    As we do not receive any response from you on the previous question/reply/answer that we have provided, for now I will set this case to Close-Pending.

    Regards,

    Nazrul Naim


Recent Discussions