Forum Discussion

zhangxianyu's avatar
zhangxianyu
Icon for New Contributor rankNew Contributor
10 months ago

DDR3 uniphy init fail,please help

我的 DDR3 PCB 板初始化失败，phy_cal_debug_info==257，我启动了 memory toolkit，它显示验证失败。现在，在使用掩码功能后，验证再次成功。我应该怎么做才能确保我的 DDR3 正常运行 我的 DDR3 芯片上的所有信号长度相等 My DDR3 PCB board initialization failed, phy_cal_debug_info...
Board Debug
AdzimZM_Altera's avatar
AdzimZM_Altera
Icon for Regular Contributor rankRegular Contributor
10 months ago

Hi


May I see your DDR3 IP setting from the GUI?

You can provide the snapshot of the IP GUI and put it in this forum.


Can you share the calibration report from the memory toolkit for calibration fail?

You can generate the report by clicking on Generate All Report in the toolkit.


Thanks,

Adzim


zhangxianyu's avatar
zhangxianyu
Icon for New Contributor rankNew Contributor
10 months ago

now my init sometime is sucess,sometime is fail

sucess is follow picture 

  

fail is follow picture