--- Quote Start ---
Hello,
I have the following issue: I've recently upgraded to Quarus 9.1 SJ Full Version. I'm using EP1C12Q240C8. So, I've converted the 9.0 project to the current version and everything seems fine. The project is compiled successfully. I upload the EPC2 pof file to the configuration chip. The problem is when i start the board it seems that the FPGA doesn't download the program from the configuration chip. All the pins are in high level.
When I upload the old .pof file from 9.0 version everything is fine.
Any suggestions?
Thanks in advance
Best regards,
VT
--- Quote End ---
Hi,
as far as I know there is bug in the pof-generation in Quartus 9.1. There must be a lot of threads in the forum.
Kind regards
GPK
Honored Contributor
