Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Quartus 8 & NIOS flash problem...

This is the problem I am currently experiencing: I'm using a CYC3 which has : - one IS16LV25616 SRAM - 10ns - EPS16 FLASH - 40 MHz clock I have created a custom memory interface in ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Hi milosd

I have just solved the problem. The problem is I used the Quartus programmer , not the NIOS flash programmer.

I used to convert the sof file into jic file in Quartus , and then download the jic file into the EPCS through Quartus programmer. That method doesn't work when it comes to Sram, so I always failed.

But this time I download the whole NIOS project(sof+elf) by NIOS flaah programmer, it works.

thanks for answering, good luck !