Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

programming Max3000A

Hi everyone, I have done a schematic, i compiled it and now i want to program it on MAX3000A EPM3032AT-4 CPLD. however when i try to program and detect the cpld i get the error ''unable to scan...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
12 years ago

Have a read through in-system programmability guidelines (http://www.altera.com/literature/an/an100.pdf) and refer to Figure 1 on page 5. The JTAG pins need to be connected to a 10-way header. Figure 1 shows how.

Regards,

Alex