Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

programming Max3000A

Hi everyone, I have done a schematic, i compiled it and now i want to program it on MAX3000A EPM3032AT-4 CPLD. however when i try to program and detect the cpld i get the error ''unable to scan...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
11 years ago

hey,

i connected VCCINT, VCCIO, TO 3.3V and GND, GNDINT to ground. how do i have to connect the jtag pins. which to ground and which to vcc? the device is soldered to a pcb yes.