Forum Discussion

SWang126's avatar
SWang126
Icon for New Contributor rankNew Contributor
7 years ago

programming failed with quartus_jli and Stratix-10

​I am using Quartus Prime Pro 19.1 with 19.1.1 patch. There are 3 FPGAs (1SG280HN2xxx) in JTAG chain. I can use .sof to program them properly. Then a JAM file has been generated for JTAG programming....
SWang126's avatar
SWang126
Icon for New Contributor rankNew Contributor
7 years ago

​I think our PWA design and Altera FPGAs works fine also. Cause 1: they passed BSCAN without any issue 2: schematic design was verified with Altera engineer 3: FPGAs can be programmed with .sof files using ByteBluster of Quartus prime pro 19.1 .

I am wondering if Quartus prime pro 19.1 still has same software issue as Quartus prime pro 17.1.1 which can't program FPGAs with .jam file.