Forum Discussion

Honored Contributor

10 years ago

Problem when programming Cyclone V (DE1-SoC)

Hi, I`ve recently received a DE1-SoC with a Cyclone V 5CSEMA5F31C6N. I've tried program it by three different Quartus versions (13.0sp1, 13.1 -web edition- and 15.1-prime lite edition- ) and i'...

DCárd

New Contributor

6 years ago

I have the same problem, the thing is that I already did the steps you give but still stays in "Failed" in the progress bar. The device is already replaced with the 5CSEMA5F31. What more can I do?

JShan27

New Contributor

1 year ago

Worked 3 days through this. I got mine to work in Windows 11 and Linux Mint. The latter with a slight fpga switch reconfiguration step worth noting. Not sure it's necessary but worked for me. Good luck!

community.intel.com/t5/Intel-Quartus-Prime-Software/Unable-to-program-de1-soc-device-compilation-fine-with-no-errors/m-p/1633965#M84160

Forum Discussion

Problem when programming Cyclone V (DE1-SoC)

Recent Discussions

Agilex 7 F/I Series True Differential Input Termination

Agilex 7 F Series Transceiver Pins Allowed Voltages During Powerup/When Unpowered

Bidirectional pin USB_RX with a pseudo-differential I/O standard must use the OEIN port of the node

Avalon-ST configuration with Agilex 3 fails

Trouble Getting started with Stratix 10 SOC