Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Power supply question for EP3C16 Device?

Currently I am using Cyclone III EP3C16. I will use 3.3V for all VCCIO, and 1.2V for VCCINT. When I check the pin information for this device, I found that it is required that the supply (ana...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
17 years ago

Thank you for your advice. It's really helpful.