Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

PLL's in Cyclone V

Hello, I am trying to use the output of a PLL to drive a logic in FPGA. I'm not sure which clock should be connected as the 'refclk' for the PLL and how the 'outclk' of the PLL should clock my ...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
8 years ago

Hi,

Do you have any daughter card connected to board?(In HSMC interface)?

Because K14 pin is not having any oscillator on board,It should be from daughter cards.

Best Regards,

Anand Raj Shankar

(This message was posted on behalf of Intel Corporation)