Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorPLL Phase shifting with reconfig controller
Hello, I have successfully integrated Altera_PLL and Altera_PLL_Reconfig IP in my design. I am able to change the phase of the two clocks that I am interested in. Two questions I have - ...
Altera_ForumHonored Contributor
Honored Contributorit will hold the VCO Tap info unless PLL is reset. After reset, it will return to its original tap. Each tap is tvco/8.
Btw, is there any meaning of tapping it 10 times, as 8 times is actually going back to 0/360 degree?
