Forum Discussion

ahaa's avatar
ahaa
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

pktgen-dpdk N3000

Hello, everyone, I have some problems when using the board card according to the manual of Intel FPGA Programmable Acceleration Card N3000 . I hope to get the answers here. In chapter 9, Se...
ahaa's avatar
ahaa
Icon for Occasional Contributor rankOccasional Contributor
5 years ago

Adding the last reply, here is INSTALL.md of pktgen, and for the limitation of types of uploading files，I

modified it as .txt and you can modify it for your convenience.

And there is a cable connecting QSFP A and B in 8x10G mode.

Thanks very much!

JonWay_altera's avatar
JonWay_altera
Icon for Frequent Contributor rankFrequent Contributor
5 years ago

Hi, Sorry for the delayed response. Did you resolved this?
You might want to go through the below and see if you missed anything.

1) setting the iommu=pt intel_iommu=on pci=realloc

2) Enabling VT-d in BIOS

3) Binding the XL710 and FPGA to vfio-pci drivers

4) Run testpmd

You have to make sure the above were done before you proceed to testing with a pktgen.