Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorPCB Design Guidelines
I am planning to design a Cyclone III board for a storage system. How do I determine the decoupling capacitor needed to accommodate the core power and IO switching characteristic? By the way, how can...
Altera_ForumHonored Contributor
Honored ContributorTry the following link
www.altera.com/board (http://www.altera.com/technology/signal/board-design-guidelines/sgl-bdg-index.html) It has very good general board design guidelines and will provide some insight into the choice of decoupling capacitor Also at the back of the following document there are design guidelines for board layout for a Cyclone III device http://www.altera.com/literature/dp/cyclone3/pcg-01003.pdf Hope this helps
