Forum Discussion

ns's avatar
ns
Icon for Occasional Contributor rankOccasional Contributor
2 years ago

Part status

Hi Team,

Please confirm part status of EPM5032JC and EPM5032DC

Configuration

4 Replies

  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hi,

    Thank you for reaching out. Allow me some time to look into your issue. I shall come back to you with findings.

    Thank you for your patience.

    Best Regards,

    Nazrul Naim


  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hello,


    We don’t have such parts (EPM5032JC and EPM5032DC) in Intel system. They could be incomplete. Could you please list the complete OPN string?


    Best regards,

    Nazrul Naim


  • _AK6DN_'s avatar
    _AK6DN_
    Icon for Frequent Contributor rankFrequent Contributor
    2 years ago

    EPM5K series EPM5032, EPM5064, etc were EPROM based CPLD devices aka EPLD active back in the 1990s.

    Macro cell counts from 16 up thru 192. The data sheet I have is labeled v.2 from Sept 1991. Yeah that old.

    Plastic package parts were one-time-programmable; ceramic windowed parts could be UV erased and reprogrammed.

    They likely went EOL from Altera back in the early 2000s.

    Only supported by MaxPluxII software, not Quartus.

    Second hand parts available from some resellers on the web (NOS or PULLs).

  • NazrulNaim_Intel's avatar
    NazrulNaim_Intel
    Icon for Regular Contributor rankRegular Contributor
    2 years ago

    Hi,

    As we do not receive any response from you on the previous question/reply/answer that we have provided, for now I will set this case to Close-Pending.

    Regards,

    Nazrul Naim