Forum Discussion
Occasional ContributorPackaging datasheet
Please help to share the packaging datasheet of MPN: EPCQ4ASI8N for reference.
17 Replies
NurAiman_M_IntelSuper Contributor
The packaging datasheet was provided in private message as it contain Intel confidential information.
Proceed to close case.
- NurAiman_M_Intel
Hi,
I will provide you the information through private message.
Thank you.
Regards,
Aiman
- NurAiman_M_Intel
Hi,
I am trying my best to get the info as fast as i could. My internal team will provide me the info by end of today. I will forward to you afterwards. Thank you for your understanding.
Regards,
Aiman
- NurAiman_M_Intel
Hi,
Apologize for the delay in response as i am still getting the information from our internal team.
Really appreciate your understanding.
Thank you.
Regards,
Aiman
User1584607963412451Hi Aiman, to check if there is any update? Hope you can revert by today.
- User1584607963412451Hi Aiman Well noted. Appreciate if you could expedite to obtain the information before this Friday as we are pending it to perform task. Thank you & Regards CH Ng Jabil Circuit Sdn Bhd Buyer | Keysight Workcell Ext.: +604-8102868 Mob: 011-56229363 **Please send all invoices to [email protected]<https://mail.google.com/mail/?view=cm&fs=1&tf=1&[email protected]> & any reminders or payment issue should be address to [email protected]<https://mail.google.com/mail/?view=cm&fs=1&tf=1&[email protected]>**
- NurAiman_M_Intel
Hi,
Here is the response from my internal team:
Type of container: Reel
Package media: Tube
For more information, kindly go to AN71:
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/an/an071.pdf
Regards,
Aiman
- User1584607963412451
Hi Aiman, sorry for rushing again. Can you share the info by today?
"Meanwhile, appreciate if you could provide the information of the size and dimension & incoming orientation for verification and to update in our system."
- User1584607963412451
Hi Aiman, to check if there is any update on below:
"Meanwhile, appreciate if you could provide the information of the size and dimension & incoming orientation for verification and to update in our system."
- User1584607963412451
Thanks for the info. Meanwhile, appreciate if you could provide the information of the size and dimension & incoming orientation for verification and to update in our system.
- NurAiman_M_Intel
Hi,
I am checking on this with my internal team. Will let you know once i got the answer.
Thank you.
Regards,
Aiman
- NurAiman_M_Intel
Hi,
Apologize for the delay in response. May i know what type of packaging information that you need and the purpose of it? What do you mean by physical part?
Do you mean part marking verification? If yes, sorry to let you know that, we do not provide part marking verification in order to avoid the devices from grey market.
Or you mean this datasheet?
https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/cfg/cfg_cf52014.pdf
Let me know your concern. Thank you.
Regards,
Aiman
- User1584607963412451
Hi Aiman, sorry for rushing, do you have further update on this?
- User1584607963412451
Thanks Aiman. However, we need the information for the incoming orientation and packaging type (T&R or tray). Herewith attached sample packaging data sheet for your reference. Hope you can share it to us.
- NurAiman_M_Intel
Hi,
Thank you for contacting Intel community.
Please refer to the link below for EPCQ4A datasheet.
https://www.intel.com/content/www/us/en/programmable/support/literature/lit-index/lit-pkg/package.html?family=EPCQ-A
Thank you.
Regards,
Aiman
- User1584607963412451
Hi Aiman, Any update? the link shared do not have information we require. There is no packaging information in the link. Appreciate if you could share the photo of physical part for verification. Your prompt reply are highly appreciated.
- User1584607963412451
Hi Aiman, there is no packaging information in the link. Appreciate if you could share the photo of physical part for verification.
