Forum Discussion

töz00's avatar
töz00
Icon for New Contributor rankNew Contributor
5 years ago

on chip memory does'nt work with 150 MHz on Cyclone V E development kit

hello dear Intel, I am using Cyclone V E development kit. I set up a simple nios system(clock-pll-nios II processor- onchip memory-jtag uart) . This system runs with 50 MHz clock frequency. When i ...
sstrell's avatar
sstrell
Icon for Super Contributor rankSuper Contributor
5 years ago

It would be necessary to set up timing constraints and perform a timing analysis to verify where the failure is occurring.

Also, which version of the Nios II are you using: e (no license needed) or f?

#iwork4intel