Forum Discussion

Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

NIOS II flash programmer

Hi, I have build a custom board with EP3C16Q240 having M25P16 [Nymonix 16Mb] serial flash device to store my FPGA configuration data & Program data. After building the .sof and .elf when I tr...
Altera_Forum's avatar
Altera_Forum
Icon for Honored Contributor rankHonored Contributor
16 years ago

Hi,

I have set the MSEL pin to JTAG mode while programming the serial flash,So I got the above mentioned error.

When I set MSEL to AS configuration and program the serial flash,I could program it with NIOS II flash programmer.