Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorNIOS II and Cyclone III Remote Update
Have spent several days now searching and reading and think I am nearly there... but not quite. I am using the NIOS II core with SOPC builder. I use Quartus II for the FPGA image. This is a projec...
Altera_ForumHonored Contributor
Honored ContributorYou must enable the watchdog feature in the factory software before triggering the reconfiguration; then you clear it in the application software. This way if fpga is configured but software doesn't start, the watchdog would reset back to the factory image.
