Forum Discussion
Altera_Forum
Honored Contributor
Honored ContributorNIOS II and Cyclone III Remote Update
Have spent several days now searching and reading and think I am nearly there... but not quite. I am using the NIOS II core with SOPC builder. I use Quartus II for the FPGA image. This is a projec...
Altera_ForumHonored Contributor
Honored ContributorIndeed my Nios processor runs at a frequency of 80 MHz cpu_clk, I have a clock bridge with a frequency of 9,1 MHz and a frequency of 25 MHz for
the remote update MM slave, do I have to change the clock frequency of the remote update MM slave to correspond with the frequency of the clock bridge ? otherwise everything is well connected !
